Homemade Wheel Chocks
Back in 2004, I made a clamping chock out of a 4x4 and threaded rod that worked well for me through the years. During the winter of 2013, it was stolen off of my TT while in storage. I have made ...
Forum Discussion
kevden wrote:
I made a set using bolt, washers and nuts, but I have noticed that although they do keep the trailer from rolling, they will still allow the wheels to rock forward/backward slightly. With a family of 5 sleeping inside, I need to stop as much movement as possible to keep us from waking each other up anytime someone rolls over in bed!
I wonder if two bolts spaced out as close to the tires as possible would do it?
Do what you want with chocks, but the trailer is still sitting on rubber donuts and flexible springs. Adding another pair of jacks, just in front of the tires, will eliminate much of that flex.
