Forum Discussion
JaxDad
Aug 02, 2014Explorer III
I used a twin LED licence plate light, but snipped the wire between them and soldered in a third lead, 2 x positive, 1 x negative, wired to a 3 position rocker switch with LED pilot light. Center is off and switch lit, up is both LED's, down is a single LED.
The light was $6, the switch and wire was already in 'inventory.
The light was $6, the switch and wire was already in 'inventory.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,352 PostsLatest Activity: Jan 20, 2025