Forum Discussion
discovery4us
Dec 19, 2014Explorer
My toy hauler had two lights mounted on the top back but I found they were really only good for loading and not backing. I wired the center plug on the truck for backup lights and then mounted two KC floodlights just under the rear bumper of the trailer and then up to the trailer plug. Put the truck in reverse and on came the lights. I used heavier gauge wire, the relay that came with the lights and zip tied the wire to the trailer frame.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,353 PostsLatest Activity: Feb 14, 2025