Forum Discussion
Happy_Prospecto
Dec 27, 2014Explorer
When I ran my wires to rear of the Toyhauler I ran them in a old garden hose. I measured how far it was to the rear of the trailer, laid out the hose on the ground, pushed the wires in the hose and then installed the hose along the trailer rails.
Although not bullet proof, this method has worked out well for a goodly amount of years.
Although not bullet proof, this method has worked out well for a goodly amount of years.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,353 PostsLatest Activity: Feb 14, 2025