Forum Discussion
JiminDenver
Jun 20, 2013Explorer II
So I have to report a failure both in the original panels and in the 120 LED porch light.
We had 3 miles of wash boards and rough roads to get to the site this time. I don't know if that had a effect or not but one of the panels had the solder to the cord fail and 3 of the LEDs started to blink and then went out on the 120 LED porch light. I replaced both to see if the second 120 LED unit would fail. The panel will be fine with a few seconds with a soldering iron.
Otherwise we went out for 6 days and lit the trailer up end to end every night.
We had 3 miles of wash boards and rough roads to get to the site this time. I don't know if that had a effect or not but one of the panels had the solder to the cord fail and 3 of the LEDs started to blink and then went out on the 120 LED porch light. I replaced both to see if the second 120 LED unit would fail. The panel will be fine with a few seconds with a soldering iron.
Otherwise we went out for 6 days and lit the trailer up end to end every night.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,352 PostsLatest Activity: Jan 20, 2025