Making a bedrail
Anyone have an idea for a 'post and socket' that would work to make a removable bedrail for an overhead bunk? The mattress on our drop down bunk sets on springy wood slats so the normal bedrail that w...
Forum Discussion
Small blocks of wood for spacers installed along the front spaced apart the width of the upright rail pieces on left and right and then a solid piece of wood left to right installed on top of the spacers. Do this at high point of front and another set at low point .You will now have a place for the uprights to drop down behind. 3/4 in finished plywood would be a good choice, sand the edges slightly to ease the corners. Very strong. Hope I explained it well enough.
