Manual transfer switch for connecting gennie?
I want to mount my generator on the back of my trailer bumper and hard wire it into my WENCO power center with a switch. I would run a 10/3 30 AMP cable about 25 ft to the power center. I need help wi...
Forum Discussion
Just install this relay and parallel the coil with the generator input.
https://smile.amazon.com/gp/product/B07FCJFGL9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hook the power center to the operating points, the shore cord to the normally closed and the generator input to the normally open.
Switches both the hot and neutral. Wire the grounds all together.
Easy and passive so you cannot forget.
Housted
https://smile.amazon.com/gp/product/B07FCJFGL9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Hook the power center to the operating points, the shore cord to the normally closed and the generator input to the normally open.
Switches both the hot and neutral. Wire the grounds all together.
Easy and passive so you cannot forget.
Housted
