Need Idiots Guide for 12V RGB LED Controller
So, installed this light system to light up the bottom area of our RV. Came with a RF Wireless Remote. Remote has a simple 10-button system, with simple words on each button. Mode +, Mode -, Speed ...
Forum Discussion
I will take a guess at this.
Mode - 19 modes - probably
1. All on steady
2. All blink
3. Running lights
4. Alternating red, green, blue blink
5. Just red
6. Just blue
7. Just green
etc. etc. etc.
Static colors probably means all red or all blue or all green
Brightness probably means just what it says. You can adjust the brightness of the lights.
Speed probably means the speed at which the lights flash, change color etc.
Color + and - most likely means the intensity of the color.
I would say the "demo" button will cycle the lights through all the different possibilities.
Those would be my guesses at what the different remote commands do. As you already did, just continue to experiment with them and note what happens when you push a particular remote button.
Hope this helps a bit. :)
Just send the check to your favorite local charity! :B
Barney
Mode - 19 modes - probably
1. All on steady
2. All blink
3. Running lights
4. Alternating red, green, blue blink
5. Just red
6. Just blue
7. Just green
etc. etc. etc.
Static colors probably means all red or all blue or all green
Brightness probably means just what it says. You can adjust the brightness of the lights.
Speed probably means the speed at which the lights flash, change color etc.
Color + and - most likely means the intensity of the color.
I would say the "demo" button will cycle the lights through all the different possibilities.
Those would be my guesses at what the different remote commands do. As you already did, just continue to experiment with them and note what happens when you push a particular remote button.
Hope this helps a bit. :)
Just send the check to your favorite local charity! :B
Barney
