Outside shower conversion to faucet?

that shower heads standard hose & I just changed it to a multi pattern hose nozzle. I can stretch it enough to hose the front cap on jet.

You can put a sink faucet head on instead of the shower head. Any household sink head from hardware store will fit. The ones that have the hose extension on the faucet. All the fittings are the same on RV as in a house kitchen. All you need to do is put the cradle in a position where the faucet aims where you want it.

If you can move the faucet to one side would you be able to swing the spout into the compartment?

I stand corrected. That would work fine.

STBRetired wrote:
Look at the way the existing valve set is installed. The water connections are horizontal, not vertical as would be needed for the faucet you chose. You would have to drill new holes in the "box" and plug the old ones somehow. Hopefully there is enough extra PEX behind the box to reach the new mounting position, or you will need to extend them. I think putting a dish sprayer head on the end of the hose instead of the shower head is the best suggestion.

It isn't obvious but look closely, the faucet pictured is wall mount.

Look at the way the existing valve set is installed. The water connections are horizontal, not vertical as would be needed for the faucet you chose. You would have to drill new holes in the "box" and plug the old ones somehow. Hopefully there is enough extra PEX behind the box to reach the new mounting position, or you will need to extend them. I think putting a dish sprayer head on the end of the hose instead of the shower head is the best suggestion.

I'm thinking about buying the below faucet. It has 1/4 turn ceramic valves and a 10" spout that will be needed since the mount is recessed. The spout will need removed to close the compartment.

Sjm9911 wrote:
I cant figure out how to post pictures here yet, go to post 3 here. snip...

Take a look at this thread. It is super easy.:)
Barney

How about you take the hose assembly out and put on an air hose quick connect. There are lots of thread and size adaptors for this. Make it rigid and you could rig up a connector with a spout. Take it off when not needed and store it.

Sjm9911 wrote:
I cant figure out how to post pictures here yet, go to post 3 here. Its a good idea, just replacing tbe shower head with a faucet. I can get the where to get it later if you like. And i hope its ok to link to other sites. https://www.popupportal.com/threads/best-camper-mods-in-the-past-year.130226/#post-1350403

Thanks, I happen to be a member of that forum and have 2,435 posts from back in my Aliner years.