Spray attachment for Dometic Toilet

[Ron3rd]

Has anyone installed the spray head accessory for a Dometic 310 china toilet, and if so, how do you like it and how did the install go?

[Ron3rd]

Well, I learned something. I need the hand spray kit WITH the vacuum breaker (385319054) as my vacuum breaker does not have the stub for the hand sprayer hose. The cheaper 385311124 kit is just the hand sprayer and hose and is probably intended as a replacement part if you already have a sprayer. In summary, there are 2 vacuum breakers used; 1 for use with sprayer and includes stub for sprayer hose, and 1 that does not have the stub for the sprayer. Thanks for all the input folks, I went ahead and ordered the kit of Amazon.

[Lantley]

big buford wrote:
I had installed mine on the nub, only had low pressure when holding down foot pedal? Ended up using a sharkbite fitting T'ed in the 1/2 inch supply line with standard kitchen spray attachment. Full blast with the sprayer now, no need to step on pedal, works great.

I'm curious, have others obtained full pressure spray without stepping on toilet when hooked to the nub? Maybe I did something wrong?

I chose your direct method as well. I have a lot more pressure that way. My turd blaster gets the job done!
Sharkbites are a wonderful thing.

[Ron3rd]

Thanks for the info folks, didn't know the foot pedal had to be down to operate the sprayer. Makes sense though. If I went the direct route, I'd add a shutoff.

[WeBeFulltimers]

Add a little extra water to the bowl before "dropping the bomb" and you won't need a sprayer. :W

[Old-Biscuit]

The reason the sprayers are connected after the water valve (on vacuum breaker stub) is so that full water pressure is not on sprayer at all times......only when pedal is depressed fully when flushing toilet.

Just like how kitchen sink sprayers are connected.....no pressure on sprayer without faucet open.

The shutoff on sprayer handle is not designed to stop full line pressure and can drip/leak.

Just be careful of water pressure.

[Ryley]

I used Mfg Part #: 385319054, cost about $20. I just removed the old valve from the back of the toilet, and installed this one. Took about 15 mins.
T'ing into the supply line before the foot valve would be nice for using the sprayer with the need of using the foot valve. Wish Id thought of that. 🙂

[deafsetter]

Hubby did it. Seemed pretty easy. Hopefully he'll add some input to this topic.
At first I thought it was not necessary, but I now love it. Really helps with getting everything clear of the bowl.

[stuplich]

big buford wrote:
I had installed mine on the nub, only had low pressure when holding down foot pedal? Ended up using a sharkbite fitting T'ed in the 1/2 inch supply line with standard kitchen spray attachment. Full blast with the sprayer now, no need to step on pedal, works great.

I'm curious, have others obtained full pressure spray without stepping on toilet when hooked to the nub? Maybe I did something wrong?

big buford

Maybe we both did something wrong??......I also T'ed into the 1/2 inch supply line and added a shut off valve and a standard kitchen spray attachment. (that results in a full blast spray and wastes less water).

Mel
'96 Safari, Sealand 510 toilet

[big_buford]

I had installed mine on the nub, only had low pressure when holding down foot pedal? Ended up using a sharkbite fitting T'ed in the 1/2 inch supply line with standard kitchen spray attachment. Full blast with the sprayer now, no need to step on pedal, works great.

I'm curious, have others obtained full pressure spray without stepping on toilet when hooked to the nub? Maybe I did something wrong?

[ADAD437]

yes it is an option, i had mine installed with the toilet and love it.

[Ron3rd]

Old-Biscuit wrote:
Your part number is not long enough.......3853111....it's missing 2 numbers and the only numbers that match up to that sequence is 64 (385311164----seal, grommet for the vacuum breaker).

Dometic/SeaLand......same same

Sprayer is an option.....part number for kit is 385319054 which is the correct kit in your CW link. Sprayer, vacuum breaker, seal, hose brace/clamp & wall bracket.

You're right OB, I dropped 2 digits off the cut and paste. The correct number on the Dometic parts list is 385311124 which pops up everywhere on a google search. I'll go with that kit. Thanks for the info.

ON EDIT,
It looks like they offer 2 kits, one with the vacuum breaker (385319054) and the one without: 385311124. I can't see the back well without pulling the seat off and I'll do that in the morning. It looks like the vacuum breaker is already there.

Here's a link to the parts list so you can see what I'm talking about:
310 Parts List

[Old-Biscuit]

Your part number is not long enough.......3853111....it's missing 2 numbers and the only numbers that match up to that sequence is 64 (385311164----seal, grommet for the vacuum breaker).

Dometic/SeaLand......same same

Sprayer is an option.....part number for kit is 385319054 which is the correct kit in your CW link. Sprayer, vacuum breaker, seal, hose brace/clamp & wall bracket.

[Ron3rd]

old guy wrote:
I thought the 310 came with a sprayer, mine did

Thanks for the info folks, my 310 on my new Windjammer did not come with the sprayer for some reason. I'm confused what to order; the Dometic parts list for the 310 shows the kit optional under part number 3853111 (Dometic Spray Kit), but if you google that number, nothing comes up. If you google Dometic Hand Sprayer, you get this from CW:

Dometic Hand Sprayer

so I'm wondering if that's the right kit as that model is also listed for a Sealand marine toilet.

[old_guy]

I thought the 310 came with a sprayer, mine did