โMay-05-2014 10:45 AM
โMay-30-2014 08:32 AM
โMay-30-2014 06:38 AM
โMay-06-2014 06:03 AM
Bumpyroad wrote:I had the same problem with my spinning rods and reels however my 2 fly rods and reels stay in the PVC tubes without vibrating out because the reels are at the very end of the rod butt. I keep my spinning rods in my rear compartment against the wall with holders I made with 1 in by 1 in split Al tubing along with my rubber raft, life jackets and other fishing supplies. They all stay in place while traveling.
one possibility would be to mount horizontal rod holders on the roofs of compartments to hang them from. do not hang with the reels if they put any bend into the rods while hanging.
I have made storage tubes out of PVC pipe with a screw plug end in them.
bumpy
โMay-05-2014 11:49 PM
โMay-05-2014 11:21 PM
Bumpyroad wrote:
I have made storage tubes out of PVC pipe with a screw plug end in them.
bumpy
โMay-05-2014 10:29 PM
โMay-05-2014 04:56 PM
โMay-05-2014 01:15 PM
โMay-05-2014 12:18 PM
โMay-05-2014 11:29 AM
โMay-05-2014 11:27 AM