Water pump...if everyone can keep their cool!
Since my original post got closed down:(, I think I have come up with game plan! I will keep the existing 4048 SureFlo, add a couple feet of 1/2 flexible high pressure hose on the downstream side of ...
Forum Discussion
SoundGuy wrote:crcr wrote:
Thanks for all SoundGuy and Lynnmor, appreciate it. So I'm thinking two of these compression for Pex to Barb fitting for soft braided hose fittings might just fill the bill for my application. What do you think? Am I on the right track now?
That's one alternative but as I said earlier I don't see the need to cut the PEX at all if you can disconnect it from the pump, leave the PEX connector as is, and simply connect your soft braided hose to that connector, using adapters if need be.
![](http://i.imgur.com/xycwxAal.jpg"width=200")
Thanks. I like that solution, but the pump, the Pex, and the back wall, are all in such close proximity, unfortunately, I don't think there is room to accomplish that.
