Forum Discussion
allcool
Sep 10, 2013Explorer
Crazy Cooter wrote:
Installed SPP6 thinking it would be plenty. I think I remember it being a three terminal cap and piggybacking it to the both common and terminal with the wire I traced to the compressor. I left the original cap connected.
May have to get back up there and have a look.....
Diffidently take out the old start kit, and verify connections to HERM and COM terminals on the cap.
That could be your problem.
SPP6E is a good hard start kit. Take out your old start kit, and leave the spp6 connected.
About Fifth Wheel Group
19,008 PostsLatest Activity: Mar 07, 2025