Dexter EZ Lube
I am trying to find the proper GREASE for the ez lube axles. I am going to use the grease gun method per Dexter. Where can I buy it I am having a hard time finding any of them. Thanks for your help. ...
Forum Discussion
TnTtravelers wrote:
Be careful pumping grease into those ezlube bearings. I've heard that you can easily blow out the inner seal and grease will contaminate your brakes. Not a good thing. You should only need to push a couple of pumps in there once a year, if even that. What gives me pause is that you stated that you pumped 100 X into them.
Did you read this part?
"I scooped out as much of the old grease possible and re assembled setting the bearings per Dexters recommendations."
So the cavity was mostly empty. It takes quite a few pumps just to fill the voids and then to push out the old grease.
You need to pump enough grease into the system to see fresh grease coming out and scoop away old grease. Sounds like you need to read the DEXTER directions and give it a shot yourself. As I said the grease flowed thru the bearings very easily.
