Direct TV Won’t Work on my 2018 Montana?
So something is not working for me. I am getting a Signal 775 trouble communicating with dish. I have 3 connections in the outside command center. 1 for cable..2 different ones that both say satellite...
Forum Discussion
Test each cable to insure they are marked correctly.
This can be done with an Ohm meter. Connect meter between center pin and outer metallic area.
I am thinking that they are marked incorrectly.
The satellite cannot have any splitters or other devices. it must run directly to the receiver.
Verify that the satellite does not go to the antenna power supply. If it does some will work with antenna power booster switch off.
This can be done with an Ohm meter. Connect meter between center pin and outer metallic area.
I am thinking that they are marked incorrectly.
The satellite cannot have any splitters or other devices. it must run directly to the receiver.
Verify that the satellite does not go to the antenna power supply. If it does some will work with antenna power booster switch off.
