I know my post is years later, but I took it apart. I'm hoping someone knows where I can buy the clevis pin that goes on top that has the cotter pin, that's all that's wrong with mine.
My control panel failed last summer and I used a drill to lift and drop the gear manually, so I assume I used a little more torque than I should have when I raised it all the way up. I have the GC 3.0 system and it's my D/S rear gear that snapped.
According to Lippert, they don't offer a service kit for this, which is ridiculous if you ask me. They want me to spend $450 for a new one. Surely I can source the cotter pin that goes through, even from a different manufacturer? I would be very grateful if anyone else has figured this out. I'm not sure on the exact length as it snapped, but I would say it's about 1-1/8" (total length) and 5/16" wide.
Unless I’m misunderstanding your post, i searched for 5/16” Clevis pins on Amazon and got over 12 pages of results. (Your results may vary)
