Forum Discussion
fj12ryder
May 23, 2014Explorer III
After reading some posts about this problem, I pulled part of the underbelly off my 2010 Fuzion to check the tank. I discovered that several screws that hold the braces were loose and backing out. They used self-tapping screws to hold the braces in and most were okay, just a few loose. I replaced them all with bolts with washers and self-locking nuts.
The tank itself was well supported with plenty of braces to take the weight, just the retaining screws had come loose.
The tank itself was well supported with plenty of braces to take the weight, just the retaining screws had come loose.
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 13, 2025