Front hydraulic landing gear settling
We have a 2014 Cedar Creek 5th wheel with the Lippert hydraulic 6 point leveling system. Recently the front landing gear has started to settle slowly after being set up... approximately 1/8" per d...
Forum Discussion
Thanks for the replies.
I'm monitoring the settling for the next couple of days.
Checking to see if the fluid level in the reservoir changes after settling a inch or more. If it rises I'm guessing its a bad cartridge valve on the right jack.
So far today the front landing gear hasn't settled at all. Typically it would have settled a measurable amount by now.
Keeping my fingers crossed... maybe when I tightened the set screw on the cartridge valve it fixed the problem but took a day to have an effect.
I'm monitoring the settling for the next couple of days.
Checking to see if the fluid level in the reservoir changes after settling a inch or more. If it rises I'm guessing its a bad cartridge valve on the right jack.
So far today the front landing gear hasn't settled at all. Typically it would have settled a measurable amount by now.
Keeping my fingers crossed... maybe when I tightened the set screw on the cartridge valve it fixed the problem but took a day to have an effect.
