Forum Discussion
- ACZLExplorer130# is what I go with.
- alboyExplorer120 ft lbs
- for MY 9/16 x 18, i have always done 140-- WITH ALUMINUM WHEELS
Here is something else I found - clicky - Cummins12V98Explorer III9/16" can be torqued to 150# with washer type lug nuts and 130# for tapered.
- garyp4951Explorer IIII hope the factory didn't ruin mine.
I checked my new fw last week, and they were torqued to 170ft. lbs., I had to get a pipe to extend my breaker bar to loosen them to 120 ft.lbs. - prelucirExplorerFrom the link above, I read that 120 to 130 is what I should torque them to. Since my wrench was already set at 125, I went with it.
Thanks guys. - JKJavelinExplorer III
prelucir wrote:
From the link above, I read that 120 to 130 is what I should torque them to. Since my wrench was already set at 125, I went with it.
Thanks guys.
FYI, you should always unload your torque wrench after using it....bring the setting back down to near zero....to keep it in calibration. I ruined my first one that way.
JK
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 13, 2025