intermittent brakes
I am having the intermittent brake problem. I have done some diagnostics as recommended in other posts. I pulled the emergency connection and all four wheel rolled, I checked for power at wires coming...
Forum Discussion
JRscooby wrote:
IMHO, the best way to make a connection is with the right sized crimp connector, a good crimp tool. Fill the connector with blue Form-a-Gasket before you put the wires in, wipe off the excess.
I have the proper heat shrink waterproof marine connectors, the proper stripping tool and the proper crimping tool, BUT this is a pain in the a-__ very difficult to get the crimping tool up to the back side of the hub and the wires going to the magnets are really short, probably easy in the factory when there were no tires, shocks etc in the way. I have all the connectors crimped but I still need to apply the heat gun to them.
