Larger landing gear pin size
I am wondering if anyone has enlarged the landing gear pin holes from 3/8" to 7/16". I am going to get LG pull pins. A 7/16" pin is available. I do not see any problem making the holes bigger to a...
Forum Discussion
csamayfield55 wrote:
I can't see any gain from drilling out every hole in your landing gear. IT won't give you any added strength or stability and actually may degrade the inner arms. Just keep the 3/8's if that is what you have.
Remember, you have to drill EVERY hole in the inner tube or the pin won't go through
Chris
X2
That and every hole you drill will expose raw metal to rust.
