Forum Discussion
RCMAN46
Aug 22, 2014Explorer
Do not bet on the louvered tail gate. I have one on my 05 Chevy 2500 HD pulling a 5th wheel trailer.
I had a pair of blocks I use under the landing gear. They were 12x12 inches made from two 2x6 12 inches long screwed to a 3/4 inch 12x12 piece of plywood.
The blocks were in the back of the bed and at 50 mph one was sucked out of the bed when towing the trailer.
I also carry a 1 gallon gas container for my Honda generator. I have it tied with a rope to the bed rail. I have seen the gallon of gas lift up off the floor of the bed.
I had a pair of blocks I use under the landing gear. They were 12x12 inches made from two 2x6 12 inches long screwed to a 3/4 inch 12x12 piece of plywood.
The blocks were in the back of the bed and at 50 mph one was sucked out of the bed when towing the trailer.
I also carry a 1 gallon gas container for my Honda generator. I have it tied with a rope to the bed rail. I have seen the gallon of gas lift up off the floor of the bed.
About Fifth Wheel Group
19,007 PostsLatest Activity: Feb 28, 2025