New season. Got my work cut out.

[talonhead]

Went to look at the camper today, no signs of mouse activity or leaks-good.
Will have to get some putty for redoing the trim seals, and replace the wiring harness on two of the holding tanks.
Going to check in at the storage office tomorrow to check about moving my space. Right now I'm between 2 pushers, and a small sink hole:) Backed the Ram under the pin, cleared by 1.5" 😮 but it has sunk about an inch in the gravel. Definitely have to get some height on the trailer to hook up to the Ram.

Now I have a question, on the nose of trailer, the fiberglass has pulled up from the horizontal trim piece. Can it be glued back down? If so what do you use?
MikeH

[rhagfo]

talonhead wrote:
Went to look at the camper today, no signs of mouse activity or leaks-good.
Will have to get some putty for redoing the trim seals, and replace the wiring harness on two of the holding tanks.
Going to check in at the storage office tomorrow to check about moving my space. Right now I'm between 2 pushers, and a small sink hole:) Backed the Ram under the pin, cleared by 1.5" 😮 but it has sunk about an inch in the gravel. Definitely have to get some height on the trailer to hook up to the Ram.

Now I have a question, on the nose of trailer, the fiberglass has pulled up from the horizontal trim piece. Can it be glued back down? If so what do you use?
MikeH

Really need a picture of the problem. Somewhat hard to understand the issue without a picture.