Raising a 5er
Guys. I have a new Chevy and the bed is deeper than my old LLY so I am having to lift the hitch, lots of adjustment holes for that. If I do that the rear end of the 5er would be too low I was look...
Forum Discussion
routemaster wrote:
I don't have any extra holes in the hangers. I have thought about the Correct Track they say that can lift by 2ins?
Also no chance to flip the axle thanks.
My thread about lift I did
I did a 1.5" lift with the Mor/Ryde x-factor. If you read through all 4 pages of this thread, you'll see the discussion about the x-factor cross-member brace. You can add up to 3 of these, I think. The manufacturer of my 5th wheel had to do a recall on a similar 5th wheel and Mor/Ryde designed the lift and included 1 x-factor. So, I copied that solution for my lift.
The Correct Track is another route to go and can get you to 2". I probably would have been better off with 2" or more. I think I got 1.5"-1.75" max on the lift I did. A little more would have been better, but I'm happy with what I ended up with.
