Removed hitch - holes in bed of truck
We removed the 5th wheel hitch from our truck because we are downsizing to a small travel trailer. Question: What can we put in the holes to prevent future rust? The truck has a sprayed bedliner, b...
Forum Discussion
I closed off each hole from underneath with a piece of Gorilla Tape. Then up top I dropped a penny in each hole and then filled each hole with J B Weld. Smoothed the J B while it was pliable and let it dry overnight. I then rough sanded the J B to conform with the bed floor and sprayed each area with rubberized undercoating spray. Turned out so sweet that you can't even see where the holes were on the sprayed in bed liner.
Cheers!
Mike
Cheers!
Mike
