Removed hitch - holes in bed of truck
We removed the 5th wheel hitch from our truck because we are downsizing to a small travel trailer. Question: What can we put in the holes to prevent future rust? The truck has a sprayed bedliner, b...
Forum Discussion
This is the OP. THANKS for all of your ideas. The bolts from the hitch went with the hitch to the new owners.
WHAT WE DID: We sanded the hole lightly underneath and used Gorilla Tape. In the truck bed, we used J-B Weld SteelStik which is steell reinforced epoxy putty. It is a putty that you mold to fit the size holes. We bought J-B Weld from Home Depot in their paint dept.
Thanks again for all of your suggestions. Oh...coins did not fit the size of our holes so we couldn't use that idea.
Don
WHAT WE DID: We sanded the hole lightly underneath and used Gorilla Tape. In the truck bed, we used J-B Weld SteelStik which is steell reinforced epoxy putty. It is a putty that you mold to fit the size holes. We bought J-B Weld from Home Depot in their paint dept.
Thanks again for all of your suggestions. Oh...coins did not fit the size of our holes so we couldn't use that idea.
Don
