short bed truck
Looking for input on Pullrite slide hitch or Reese Revolution pin box. Had one little mishap last season don't want to mess around anymore with manuel slide hitches. Going to put in one or the other. ...
Forum Discussion
Just to give comments for the other side -
Using the Revolution means you can get by spending far less for a hitch. And also means saving a good bit of weight in the back of the truck. Both were important considerations for my smaller rig. And I really wanted a hitch that was manageable by me to take in and out of the truck, leaving the bed clear. Only two downsides to the Revolution I've found so far: It is critical to get a straight on shot to it when hooking up, or it can give you fits. And, when leaving it at a dealer, they pin the hinge point to make it easy for them to move around their lot - but it gets really, really bad if they forget to remove the pin before you hook up and drive off.....
Using the Revolution means you can get by spending far less for a hitch. And also means saving a good bit of weight in the back of the truck. Both were important considerations for my smaller rig. And I really wanted a hitch that was manageable by me to take in and out of the truck, leaving the bed clear. Only two downsides to the Revolution I've found so far: It is critical to get a straight on shot to it when hooking up, or it can give you fits. And, when leaving it at a dealer, they pin the hinge point to make it easy for them to move around their lot - but it gets really, really bad if they forget to remove the pin before you hook up and drive off.....
