Slider hitch options for Ram Puck System
I am growing weary trying to figure out which hitch will work with my 2015 Ram 3500 / 6.5 bed with the Ram Puck System. My heart is sold on the B&W Companion RVK3600 but figure I need to stay with ...
Forum Discussion
I put in a Demco Hijacker 6099 picture frame and a manual B&W RVK3270 slider. I found that I could turn pretty shape with the hitch in the tow position, however with the large box in the front of the bed, I would not be able to unlatch the hitch in the tow position. I set the head in the rear bolt holds. The RVK3270 has only 2 positions where as the RVK3600 has 4.
If you are not going to have a box in front of the hitch, then I think a RVK3600 in it's rear most bolt holes will be fine. I could most likely turn about 75 degrees. You will note I have an extended pin box and curved front.
Note, if you have a tail gate on you have to watch for it hitting when hitch is slide back! Chris
If you are not going to have a box in front of the hitch, then I think a RVK3600 in it's rear most bolt holes will be fine. I could most likely turn about 75 degrees. You will note I have an extended pin box and curved front.
Note, if you have a tail gate on you have to watch for it hitting when hitch is slide back! Chris
