Tandem axle equilizer and shackle angles
I need some input or at least some opinions on this subject and the reason I ask is this: I am replacing the shackles and equalizers on my 5th wheel project with a Dexter EZ-flex and I have the choice...
Forum Discussion
Tho I didn't have a press, neighbor had a vise and worked just the same when "pressing" wet bolt into the tabs. What I did too was mark the end of the bolt w/ a black sharpie inline w/ the holes in bolt so when it got pressed in, the line was at the 3/9 position. Zerks in inside as well. So I have to get under the trailer to grease it. So what. More room. Not sure it it makes that much of a difference, but I jack up the rig to grease so grease goes into the wet bolts easier.
