That went as expected-Part Deux
After my first failure to get the 5th wheel backed into the site. I got a friend of mine to help guide me this time and I ignored my wife(after 25 years of marriage that part is getting easier). Put...
Forum Discussion
1. If your last motion before unhitching was to pull forward, you have to put it in reverse to move the pin tight against the front of the hitch. Otherwise it will bind the release mechanism.
2. Raise the landing gear until you just start to see a gap between the hitch plate and the pin box plate.
3. Always wait for the landing gear motor to come to a complete stop before reversing direction. Otherwise you will blow the fuse every time.
2. Raise the landing gear until you just start to see a gap between the hitch plate and the pin box plate.
3. Always wait for the landing gear motor to come to a complete stop before reversing direction. Otherwise you will blow the fuse every time.
