We've been looking for a TT toy hauler for a while. After looking at a number of brands and floor plans, we are really liking the Evergreen Amped and Reactor lines. The Amped are a little more upscale and the Reactor are more traditional, but very nice. We looked at several yesterday and I specifically look for the weight stickers. The only ones I found were the yellow labels with the maximum capacity and the GVW. Here is the problem. The Evergreen brochure states a UVW of 7400 lbs on the Amped 27FS with a GVW of 11900. On the sticker, it had a max cargo capacity of 3000 lbs, when doing some subtraction, means the trailer would have a weight of 8900 lbs! The salesman said that you can take approx 1500 lbs off due to tongue weight! Ha, the trailer still weighs what it does, either on the hitch or the front jack. Anyway, I asked if we could have the trailer weighed before signing any paperwork or writing a check. He said they would not do that as it would put them under liability for the reported weight. I didn't understand that, why would weighing a trailer relieve the manufacturer of liability and place it on the selling dealer. I think he didn't want to see the number. Many other brands have labels that show an actual weighed number upon build completion, give or take a little bit. A couple hundred pounds is understandable.
What are your thoughts on the weight situation we are seeing? Any possible explanations for the weight difference? The trailer did not have a huge amount of options on it, only a small slide. The Reactor trailers showed a similar issue between cargo capacity and GVW. Even if propane was filled and full of gas in the gen tank, only looking at less than 500 lbs.
Should we find another dealer that will be willing to show us actual weights? Most brands show axle weights, hitch weights and cargo capacity. Add axle to hitch and you get dry weight, add cargo capacity and you get GVWR. Enlighten me if I am missing somethings.
Sorry for being so wordy, trying to get all of the info out there.
Thanks!