Ultra Fab landing gear
I’m having some issues getting my current landing gear to work correctly (detailed in another thread), one of the things I’m considering is upgrading to a beefier set of legs and dual motors. I’ve add...
Forum Discussion
Update: so I receive the UltraFab landing gear, returned home yesterday and installed it today. Fit like a glove, longest part was the wiring.
The switches are very deep, I would like to inset them (mount them from the inside compartment brought cutout to outside front). However this will not be a fi with removal of previous switch. What have people used to mount a plate on the front to cover the old holes and make room for the new? I was thinking maybe a plexiglass panel screwed into the filon and then cutout for the 3 switches (2 for the landing gear, 1 for the lights). Any better material that could be suggested?
The switches are very deep, I would like to inset them (mount them from the inside compartment brought cutout to outside front). However this will not be a fi with removal of previous switch. What have people used to mount a plate on the front to cover the old holes and make room for the new? I was thinking maybe a plexiglass panel screwed into the filon and then cutout for the 3 switches (2 for the landing gear, 1 for the lights). Any better material that could be suggested?
