Ultra Fab landing gear
I’m having some issues getting my current landing gear to work correctly (detailed in another thread), one of the things I’m considering is upgrading to a beefier set of legs and dual motors. I’ve add...
Forum Discussion
phemens wrote:
Ok, so if I understand, you mounted to the inside back of the hatch and then made some cutouts in the hatch cover so that the switches would protrude?
I two drilled 1/2" holes in the back of the enclosure (not the hatch cover). I then unscrewed the front of the switches, stuck the switches in from the back through the holes, then screwed the front of the switches back on. So the large square parts of the switches are actually behind the back of the enclosure. I had a ton of space behind the hatch cutout so having the back of the switches back there wasn't an issue.
So from the front the hatch is a solid cover and you don't see anything. When you open the hatch you only see the two handles of the switches.
