Voltage 3950 antenna location photos please??
I'm sick of the useless fixed omni antenna on my early 2011 unit. I plan to replace it with a crank-up Winegard but it won't fit in the same location. Would somebody with a later model 3950 please ...
Forum Discussion
Joe,
I investigated this a bit further and found that my '11 3905 antenna is mounted further back between the bathroom vent and main A/C but there is still not a 66" clearance to fit the Sensar antenna.
It looks like the later models relocated the antenna to the left side of the roof, above the bedroom "hallway."
Here you can see a couple high res pictures on the Voltage website. If you zoom in, you can see the crank on the ceiling. First is a 3950, second is a 3905.
3950
3905
Hope this helps. I may just go with the Jack antenna in the stock location to avoid new holes/wiring.
I investigated this a bit further and found that my '11 3905 antenna is mounted further back between the bathroom vent and main A/C but there is still not a 66" clearance to fit the Sensar antenna.
It looks like the later models relocated the antenna to the left side of the roof, above the bedroom "hallway."
Here you can see a couple high res pictures on the Voltage website. If you zoom in, you can see the crank on the ceiling. First is a 3950, second is a 3905.
3950
3905
Hope this helps. I may just go with the Jack antenna in the stock location to avoid new holes/wiring.
