WW Repairs
As just about all of us have read here, certain models of WW trailers have defects that have resulted in a number of different problems. To one degree or another, this subject has come up on this for...
Forum Discussion
jpogue wrote:
Are you going to remove all of the little OSB particles from the TPO before gluing it back down? I tried using a stiff bristle brush (not wire) and it got alot of it off but not all of it. I noticed you painted the framework in the front,was that Kilz you used there? Spent most of today scraping off ol putty and treating some of the minor stuff with copper green. Another friend of mine recommended a product called restore-it. I'm thinking about using that along the sides and in the corners where the water got into the framework.
You are right on target. Clean the TPO the best you can. Yes Kilz on the wood where I am concerned water can lay or concentrated if a leak happens again. Any treatment is goig to better than what you had.
