WW Repairs
As just about all of us have read here, certain models of WW trailers have defects that have resulted in a number of different problems. To one degree or another, this subject has come up on this for...
Forum Discussion
jpogue wrote:
How did you make the curved support pieces for the front nose cap? one of my corner pieces was completely mush I'm trying to get the other one out without damaging the paneling for the cieling. But I don't think its coming out in one piece.
I was able to get mine out barley in one peice and used it as a template. if you cant get it out, use a peice cardboard and scribe the pattern in place. Do the inside curve first and so that you have the best fit possible and then once you have a good inside curve the outside curve is easy. I used 2x12 and a peice of 3/4 plywood attached for the end studs. I used 2 - 3/4 plywood peices screwd together to create an 1-1/2 thick peice for the inside studs. I cut them with a sabre saw / jig saw.
