Sep-25-2020 09:30 AM
Sep-26-2020 09:16 AM
Sep-26-2020 08:51 AM
Sep-25-2020 04:03 PM
Sep-25-2020 12:13 PM
Sep-25-2020 11:55 AM
Sep-25-2020 10:42 AM
2oldman wrote:
It's that simple.
Sep-25-2020 10:39 AM
Talshion wrote:Just make sure you get one that's configurable for Li batteries. ie.. correct voltage, no absorb..etc. And one that will handle the solar amps you expect to harvest.
Any reviews on MPPT controllers?
Sep-25-2020 10:37 AM
RLS7201 wrote:Thank for you info on that. Was looking to do that.
Just make sure that your MPPT controller is configurable for Li batteries. It's my understanding that your new MPPT controller will need to be able to stay at 14.4 volts until the Li batteries are full. Then either the MPPT controller will shut off or the controller built into the batteries will stop the charge.
You can't have too much solar. I like 24 volt panels. They are cheaper and allow smaller wire. Over size your MPPT controller, just incase you decide on more panels.
Richard
Sep-25-2020 10:32 AM
Sep-25-2020 09:51 AM
Sep-25-2020 09:51 AM