Dometic brisk AC

dougrainer wrote:
The Cord on the new unit is just the 120 power cord to the Roof AC. THAT cord plugs into the control box that will be located in the AC opening above the lower access grill. Now, you do not state, what model AC you are replacing. If the old model was a Brisk Air, what I stated will be your model. The AC system when replacing, they only supply the Upper unit, no control box or Tstat. Just follow the OLD 6 wire power cord from the old AC and you will see where it plugs in. Doug

PS, If you have a old 600 series model number which will be a Lo Profile Penguin, let us know.

My old one is a lo profile penguin it looks like. Im taking the Brisk air back to get a Penguin II I think

Thanks ill see what I can figure out....

The Cord on the new unit is just the 120 power cord to the Roof AC. THAT cord plugs into the control box that will be located in the AC opening above the lower access grill. Now, you do not state, what model AC you are replacing. If the old model was a Brisk Air, what I stated will be your model. The AC system when replacing, they only supply the Upper unit, no control box or Tstat. Just follow the OLD 6 wire power cord from the old AC and you will see where it plugs in. Doug

PS, If you have a old 600 series model number which will be a Lo Profile Penguin, let us know.

I think you will find you need one of the new digital thermostats but I'm sure Old Doc. Biscuit will be along shortly to enlighten us.