My Bounder workhorse chassis front seat wouldn't clear the steering wheel, even when I did the procedure that everyone on the form suggested. Which was back of seat all the way forward, spin the seat, arm rest down, just before it contacts the steering wheel slide the seat forward. This is actually sliding the seat into the living area, once it clears and is spun around. The seat needed a few more inches to clear the oversize steering wheel. My wife wanted the seat to spin around, so I purchased this extension
SWIVL-EZE 15000 ALUMINUM CHAIR SEAT SLIDE 3988from eBay and attached it to the pedestal. I attached a 12 by 12 steel plate to the base of the original extenders, which remained bolted to the seat.The seat / slide/metal plate attaches to the boat slide. This added 1 & 3/8 inches to the height, but gave me six inches of being able to slide the seat forward on the spin. The slide is the one pictured on the center of the page with the handle on the bottom. My original slide extension operates, this just gives you a secondary slide extension
Here is the end results
Will & Michelle
2008 Fleetwood Bounder 38P
2005 Jeep Wrangler Unlimited
1990 Jeep Wrangler