Sewer hose storage on Class B

Saint Augustine:
Sorry I don't have access to the rv at this point in time. The holder is really nothing more than what I"ve stated and it is fastened to the rv by using longish stainless steel hose clamps which secures it to the frame. These hose clamps can be ganged to make them longer and are available for use in clamping dryer vents and such. The material for the holder is black abs sewer pipe and can be glued together and mounted without drilling any holes. If you look under your rv from the rear you'll see an open space running front to rear to the left of the spare tire. The opening of the holder for inserting the hose terminates right under the rear bumper.

ernie1, do you have pics?

I have 2005 PW Excel with the same problem that I solved by using some 4"abs pipe that runs front to rear right next to the spare tire. Put a cap on one end and a female threaded fitting on the other end. It was secured to the frame with long enough stainless steel worm clamps. All fittings fit inside this pipe.

Lets try this...



Would only let me post two photos them the image button didn't bring up the link box any longer.

(Guess that didn't work!)

I mounted a 5X5?? vinyl post cover under my 2008 when I had it. Have been trying to post photos but can't figure out how and gotta run right now. PM me if you want and I'll send you a link.

Keith

Thanks for the idea, Bumpy.

back when I used stinky slinkies I used the PresTO fit connections and that would slip off and go into the tubing. and I slid a piece of plastic guttering into the bumper to prevent holes.
I have considered B vans and decided if I get one to use a platform on the rear to hold grill, blocks, slinky, etc.

bumpy

I have used something similar to your rig. Works well but wondered about the pvc pipe attached to carrier. Thanks for pics.

Don't know if you are using your hitch, or even if you have one, but if you have one and not using it, why not something like this. I quit putting my hoses in my trailer bumper a long time ago:








What do I use that bumper for now? Well, I use it for things that will NOT get pin-holes. It's perfect for metal poles, fire place pokers, handle extensions for brooms and such, hot dog sticks, anything metal, that's long and sharp.

Saint, the black water drain attachment won't fit in my 4 inch bumper. Irritating!