โApr-20-2017 08:42 AM
โApr-22-2017 05:01 AM
SCVJeff wrote:irishtom29 wrote:Unnecessary with a ClaymoreDiskDoctr wrote:You have to catch the thief in the act to chase him off with a sword.
Claymores are the answer to so many theft problems, LOL ๐
โApr-22-2017 01:11 AM
irishtom29 wrote:Unnecessary with a ClaymoreDiskDoctr wrote:You have to catch the thief in the act to chase him off with a sword.
Claymores are the answer to so many theft problems, LOL ๐
โApr-21-2017 12:10 PM
DiskDoctr wrote:
Claymores are the answer to so many theft problems, LOL ๐
โApr-21-2017 11:35 AM
Tom N wrote:
I use one of these locking hitch pins. Available everywhere.
โApr-21-2017 09:00 AM
โApr-21-2017 04:58 AM
โApr-20-2017 11:57 PM
Jim@HiTek wrote:Ditto
After reading this thread, happy that I have both the locking pin AND the anti-rattle U-bolt in place. Now, those will never stop a determined thief, but it will slow down a lazy one.
โApr-20-2017 09:33 PM
โApr-20-2017 08:13 PM
โApr-20-2017 07:31 PM
rgatijnet1 wrote:
In addition to the locking pin, I also use one of the anti-rattle devices which means that a thief would have to spend the time to defeat two items before the hitch can be removed. The upside is that my tow bar does not rattle which means less wear and tear on both the tow bar and the hitch.
โApr-20-2017 06:06 PM
โApr-20-2017 04:14 PM
Tom/Barb wrote:Tom N wrote:
I use one of these locking hitch pins. Available everywhere.
These do not fit the hole well enough and promote wear in the hitch, and bar.
I had to ream to the next larger bolt size and use a tight fitting bolt. now there is no movement to allow wear
โApr-20-2017 03:31 PM
โApr-20-2017 03:25 PM
โApr-20-2017 02:52 PM