โApr-20-2017 08:42 AM
โApr-28-2017 09:09 AM
โApr-23-2017 04:49 PM
doc brown wrote:dcbrewer wrote:Tom N wrote:
I use one of these locking hitch pins. Available everywhere.
Same one I use!!
Ditto, going on 13 years. Use on my Blue Ox tow bar set up.
โApr-23-2017 06:36 AM
msmith1199 wrote:ya that's true.Mile High wrote:msmith1199 wrote:Probably the same guys that pull up to your new diesel pickup with a battery powered reciprocating saw and steel your entire exhaust system while your in your hotel. $1,600 ca-ching!.hohenwald48 wrote:discovery4us wrote:
The bolt and nut are good but a thief with a Makita impact gun will have it off just as quick as a standard pin.
And a thief with a cut-off wheel on a battery powered angle grinder will have the locks off just as quick.
I suspect most tow bar thefts are spur of the moment impulses on the part of the thief. If somebody shows up with intent, proper tools and a little planning nothing short of an armed guard will stop them.
And how many of those thieves pulling these "spur of the moment" thefts are carrying around a battery powered angle grinder?
Pretty easy to find a victim pickup parked in a spot where you can get the exhaust. Not so easy to find a motorhome just sitting around with a nice tow bar attached just waiting to be ground off with a grinding wheel. The point being, lock your stuff. Yeah if they have the right tools they'll get through your lock, but the vast majority of thieves don't carry the right tools for these types of thefts.
โApr-22-2017 08:20 PM
Mile High wrote:msmith1199 wrote:Probably the same guys that pull up to your new diesel pickup with a battery powered reciprocating saw and steel your entire exhaust system while your in your hotel. $1,600 ca-ching!.hohenwald48 wrote:discovery4us wrote:
The bolt and nut are good but a thief with a Makita impact gun will have it off just as quick as a standard pin.
And a thief with a cut-off wheel on a battery powered angle grinder will have the locks off just as quick.
I suspect most tow bar thefts are spur of the moment impulses on the part of the thief. If somebody shows up with intent, proper tools and a little planning nothing short of an armed guard will stop them.
And how many of those thieves pulling these "spur of the moment" thefts are carrying around a battery powered angle grinder?
2021 Nexus Viper 27V. Class B+
2019 Ford Ranger 4x4
โApr-22-2017 08:08 PM
Mr.Mark wrote:And you don't EVER want to see one from this angle. It's a shaped charge trip wire anti-personnel mine, and this is the business endDiskDoctr wrote:SCVJeff wrote:
THIS Claymore is much easier:
Always liked the "Dead Simple" instructions on those things ๐
Guys, what is that? Never have seen one nor do I know what it is used for.
Can I have a simple explanation?
Thanks,
MM.
โApr-22-2017 07:02 PM
msmith1199 wrote:Probably the same guys that pull up to your new diesel pickup with a battery powered reciprocating saw and steel your entire exhaust system while your in your hotel. $1,600 ca-ching!.hohenwald48 wrote:discovery4us wrote:
The bolt and nut are good but a thief with a Makita impact gun will have it off just as quick as a standard pin.
And a thief with a cut-off wheel on a battery powered angle grinder will have the locks off just as quick.
I suspect most tow bar thefts are spur of the moment impulses on the part of the thief. If somebody shows up with intent, proper tools and a little planning nothing short of an armed guard will stop them.
And how many of those thieves pulling these "spur of the moment" thefts are carrying around a battery powered angle grinder?
โApr-22-2017 06:42 PM
DiskDoctr wrote:SCVJeff wrote:
THIS Claymore is much easier:
Always liked the "Dead Simple" instructions on those things ๐
โApr-22-2017 06:15 PM
hohenwald48 wrote:discovery4us wrote:
The bolt and nut are good but a thief with a Makita impact gun will have it off just as quick as a standard pin.
And a thief with a cut-off wheel on a battery powered angle grinder will have the locks off just as quick.
I suspect most tow bar thefts are spur of the moment impulses on the part of the thief. If somebody shows up with intent, proper tools and a little planning nothing short of an armed guard will stop them.
2021 Nexus Viper 27V. Class B+
2019 Ford Ranger 4x4
โApr-22-2017 05:13 PM
SCVJeff wrote:
THIS Claymore is much easier:
โApr-22-2017 02:28 PM
dcbrewer wrote:Tom N wrote:
I use one of these locking hitch pins. Available everywhere.
Same one I use!!
โApr-22-2017 11:15 AM
โApr-22-2017 10:27 AM
DiskDoctr wrote:That one is too much work...SCVJeff wrote:irishtom29 wrote:Unnecessary with a ClaymoreDiskDoctr wrote:You have to catch the thief in the act to chase him off with a sword.
Claymores are the answer to so many theft problems, LOL ๐
Awesomeness, LOL.
FYI: History of the Scottish Claymore Sword
Learn something new every day :C
โApr-22-2017 09:33 AM
crasster wrote:hohenwald48 wrote:discovery4us wrote:
The bolt and nut are good but a thief with a Makita impact gun will have it off just as quick as a standard pin.
And a thief with a cut-off wheel on a battery powered angle grinder will have the locks off just as quick.
I suspect most tow bar thefts are spur of the moment impulses on the part of the thief. If somebody shows up with intent, proper tools and a little planning nothing short of an armed guard will stop them.
True. The lock stops the crime of opportunity though and the unprepared thief.
You know what is effective, putting a "Jesus is the answer" bumper sticker on your coach. ๐
โApr-22-2017 08:18 AM
hohenwald48 wrote:discovery4us wrote:
The bolt and nut are good but a thief with a Makita impact gun will have it off just as quick as a standard pin.
And a thief with a cut-off wheel on a battery powered angle grinder will have the locks off just as quick.
I suspect most tow bar thefts are spur of the moment impulses on the part of the thief. If somebody shows up with intent, proper tools and a little planning nothing short of an armed guard will stop them.