I remember this happening last fall when we went south. We moved today and had to give a new service address to get locals. Yesterday we drove also but still used the address we had for a few days. Last night and tonight the Hopper 3 did not record prime time. It had the little yellow notation on the guide like it’s gonna record, but it didn’t. Is this something to do with our hopper being off while driving and having to re aim the dish? Last fall when it failed to record I think it did work like normal on the second day. Also we missed our 7;00 show cause it was on at 6;00. I thought our guide usually showed the correct time for our service address, but it appears our guide is showing the time for our billing address.

You say you drove yesterday. Did you cross a time zone? Did you travel far enough to leave the original spot beam and enter the area of a different spot beam?

Sounds like you moved out of a spot beam and did not contact DISH with a new address. Is that right? Where are you and what kind of antenna are you using? Could you be in an EA market with a WA antenna?

We just arrived at rapid city. Our travler is set up for the west. So is this why we are going not getting the Rapid locals in SD? Also the prime time didn’t record although the guide does indicate it should be recording.

If you change spot beam areas you will have to call and get a “bump” sent to your receiver even though the correct channels for the area you are in will probably show up on your guide. I just had that discussion with dish last night. We also use the hopper 3. We reset our locals often. A suggestion is that I have found using tech support (option 4) works much better than using a normal csr (option 3). Using tech support they understand what I want and I only have to give them a zip code. Normal csr’s usually want a complete address which is unnecessary.I have found that the guide times will often not read correctly or be complete until it reloads overnite. There is a way to force it to reload but I just don’t bother.BTW, we just passed thru Rapid City and had to change locals from Sioux Falls even though the Rapid locals showed up in the guide.

go to this website http://www.satellitesolutions.com/dishnetwork/sd-dish-network-rapid-city-south-dakota.aspexample i set for id Rapid City, SD. it will give you what channels you will receive. BTW, I always use the Online Chat service for changing my service address. since 2014 only had about 5 glitches .

Another Dish network question | Good Sam Community

Dutch_12078
Explorer II
May 18, 2018
TechWriter wrote:
DC&MC wrote:
We just arrived at rapid city. Our travler is set up for the west. So is this why we are going not getting the Rapid locals in SD? Also the prime time didn’t record although the guide does indicate it should be recording.

Mmmmmm . . .

When you plug in a Rapids City, SD ZIP code like 57701 into DISH's Local Channel Finder, it shows both SD and HD channels.

However, when you check Rapid City on Satellite Guys List, it only shows SD locals, but I've heard these lists are out of date.

The fact that your Hopper 3 failed to record PTAT (Prime Time Any Time) shows may be a clue. PTAT only records in HD, not SD, unless only SD programming is available.

You should ask your question on Satellite Guys DISH Forum.

The most accurate Dish locals listing is the one updated daily by James Long.
DC_MC
Explorer III
May 18, 2018
Update: ok now on the second night here our hopper did record prime time. It recorded SD since we don’t have HD. It appears that when we have driven and moved our service address that it takes some time before the prime time stuff automatically records. It’s happened twice to us now. Now I know if we have moved that I need to tell it manually to record a specific show we might want to see.
TechWriter
Explorer
May 18, 2018
DC&MC wrote:
We just arrived at rapid city. Our travler is set up for the west. So is this why we are going not getting the Rapid locals in SD? Also the prime time didn’t record although the guide does indicate it should be recording.

Mmmmmm . . .

When you plug in a Rapids City, SD ZIP code like 57701 into DISH's Local Channel Finder, it shows both SD and HD channels.

However, when you check Rapid City on Satellite Guys List, it only shows SD locals, but I've heard these lists are out of date.

The fact that your Hopper 3 failed to record PTAT (Prime Time Any Time) shows may be a clue. PTAT only records in HD, not SD, unless only SD programming is available.

You should ask your question on Satellite Guys DISH Forum.
georgelesley
Explorer
May 18, 2018
DC&MC wrote:
I need to explain that we have a Hopper 3. It records all network prime time shows every night automatically. We do not need to tell it to do this.

We have the hopper 3 as well. It still has to know what locals and be able to receive them thru the spot beam.
DC_MC
Explorer III
May 18, 2018
I need to explain that we have a Hopper 3. It records all network prime time shows every night automatically. We do not need to tell it to do this.
jorbill2or
Explorer II
May 18, 2018
Re the recordings ..and assuming your talking about a “Local” network station , if you moved out of the spot beam of the local network channel say NBC on KEEE and change the local to the new NBC station KERR ... no it won’t record .. it’s looking for KEEE and can’t find it. You need to create a new scheduled recording for the new NBC channel. This doesn’t occur with HBO or STARZ Etc as those channels don’t change.
That’s one reason people use , and pay for the dns stations out of LA.
I don’t know why it wouldn’t record national channels .. ( like STARZ ) mine does no matter where I move.
ljr
Nomad
May 17, 2018
ljr wrote:
DC&MC wrote:
We did chat with Dish to give them our new address. Why doesn’t that person know that HD is on a different satellite. If I reprogram the travler to get 61.5 I’ll lose one of the others won’t I?

You’ll lose all of the others. That’s a limitation of the Trav’ler and why I also carry a tripod mounted Eastern Arc dish.

Based on numerous conversations with Winegard, that is not likely to change.

The average Dish CSR is not a very good source of technical information though they have improved dramatically in recent years.

I’ve encountered several EA only markets but none as far west as Rapid City. Never quite understood that.
ljr
Nomad
May 17, 2018
DC&MC wrote:
We did chat with Dish to give them our new address. Why doesn’t that person know that HD is on a different satellite. If I reprogram the travler to get 61.5 I’ll lose one of the others won’t I?

You’ll lose all of the others. That’s a limitation of the Trav’ler and why I also carry a tripod mounted Eastern Arc dish.

Based on numerous conversations with Winegard, that is not likely to change.

The average Dish CSR is not a very good source of technical information though they have improved dramatically in recent years.
DC_MC
Explorer III
May 17, 2018
We did chat with Dish to give them our new address. Why doesn’t that person know that HD is on a different satellite. If I reprogram the travler to get 61.5 I’ll lose one of the others won’t I?
ljr
Nomad
May 17, 2018
DC&MC wrote:
We just arrived at rapid city. Our travler is set up for the west. So is this why we are going not getting the Rapid locals in SD? Also the prime time didn’t record although the guide does indicate it should be recording.

Yes to both. As mentioned in your other thread you’ll need 61.5 from the Eastern Arc. Your Trav’ler doesn’t support the full EA but 61.5 will get you HD locals and PT.

Forum Discussion

Another Dish network question

About RV Must Haves

Related Content

Another tire question

Another WDH question

Another weight question

Another Water Question

another caulk question