More Dish network problems
Long story. We had a new traveler 1000 installed a year ago and a dish network Hopper 3 with sling. From the beginning we had issues with signal loss when temps went in the 30's. Finally installed a ...
Forum Discussion
TechWriter wrote:DC&MC wrote:
We have not changed the LNB. Works as long as we disconnect the hopper when searching. Then turn off the traveler and redo the cables
There are currently only two methods of using a Hopper 3 with a Winegard Travler:
- Swap out the Standard Travler LNBF with a Hybrid LNBF -- this method requires disconnecting the Hopper 3 before powering up the Travler.
- Use a DPH42 switch with a standard Travler -- this the the recommended method.
Thank you again, techwriter for the info. It does work as you said it would. As I posted above just leave the hopper and DPH42 unplugged until sats are locked.
