New motorhome hooking up tvs
Have a 2010 Itaska Suncruiser. Have the dish tailgater with the Z211 receiver which has only one coax connection. The living room hookups has a coax in from satellite dish into receiver and then an...
Forum Discussion
If you want HD on your main TV then you will need to use HMDI between the receiver and the main TV. You then then use an RF Modulator RCA to Coax plugged into the 3 RCA ports and the output of the modulator connected to the switch box. This will give you a SD picture on the 2nd TV. If you are watching the 2nd TV and you can't see the receiver you will not be able to change satellite channels unless you can point the remote at the receiver. You can also upgrade the remote to RF or replace the current receiver with a Wall which already has RF built in.
You could also get a 211K receiver which has it's own coax output in addition to the HDMI.
You could also get a 211K receiver which has it's own coax output in addition to the HDMI.
