Forum Discussion

MustangDan74's avatar
MustangDan74
Explorer
May 20, 2018

Replacing original TV hookup with a Winegard SensarPro

Hey folks, I bought the Winegard SensarPro to replace my original TV hookup but I'm wondering, the cable would run from my original plate to the back of the TV. With the SensarPro am I going to need g...
wa8yxm's avatar
wa8yxm
Explorer III
May 20, 2018
How I suggest folks do it

First remove wall plate, LABELE EVERY WIRE or Cable Now see if the Sensar Pro fits without the spacer.> it does. GOOD. it does not see if it fits with teh spacer

now make a small notch to pass the TV one lead off the back of the Sensar Pro

Re-connect label to label (Ant, TV-2 Park cable) and the power leads

Bolt it in place
Hook up TV 1 cable (if used. NOTE if nothign connected to TV 1 you do not need the notch)

Power on and see if it works.. Mine did. Still does.

About RV Must Haves

Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023