Torque Pro - Late Model Ford V10 PIDs

Question

I'm a 2016 Ford F53 chassis owner and using Torque Pro to monitor engine operation beyond what the dash instrument panel provides. I have numerous gauges set up and working, but I don't have good PIDs for Engine Oil Temp., Transmission Gear and Engine Oil Pressure.  Do any of you Torque users have PIDs established for these three gauges that the F53 system will support?

tiger02 · Answer

There are some gauges that are pretty much just dummy gauges that don't get a true value from the sensor. The sensor may only be an on/off type, and in that case you won't be able to get a pressure or temp reading. Those same sensors may not feed into the ECU, and no OBDII reader will see it.

Check out this forum as they may have much more knowledge on the V10 specific PIDs. Make sure you have the extended PIDs downloaded for the Ford as well.

Ford Trucks

Forum Discussion

Torque Pro - Late Model Ford V10 PIDs

About RV Must Haves

Related Content

Engine torque

Lug Nut Torque

Duramax Torque Management

Lug nut torque specs?

HP vs Torque