Forum Discussion
jrs1871
Jul 21, 2015Explorer
I finally got reception when I connect the coax cable directly from the antenna to the receiver. The signal on all Direct TV satellites is strong. However, when I connect the coax to the plate in the docking station and connect the receiver to the satellite connector at the entertainment center, there is no signal.
We are going to the FROG rally in a couple of weeks so I am just going to put it on my service request to check the satellite wiring connections. I pulled the outside and inside plates to make sure those connections were tight so the break is somewhere in between.
Thanks for the suggestions. They were helpful.
We are going to the FROG rally in a couple of weeks so I am just going to put it on my service request to check the satellite wiring connections. I pulled the outside and inside plates to make sure those connections were tight so the break is somewhere in between.
Thanks for the suggestions. They were helpful.
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023