sink

msmorto wrote:
Thank's I did find it

Thanks for letting us know. Hope the installation goes well.

Thank's I did find it

I Googled "kitchen sink KS01s" and this is what I got.


Is this your sink?

I did pull the tag from under the sink
the No is KS01S-GB I look on line and there is nothing anywhere
with that No for a sink of any kind.

If you don't want to remove the sink, measure the inside dimensions of the sink or sinks with the spacing between them. That will give a good estimate of the cut out size. A photo would be a help too.

Have you looked on the bottom of the existing sink for any identifying marks? (Manufacturer)

I replaced the small double plastic kitchen sink in my mh with a stainless steel one from Lowes. I first removed the old sink and carefully measured how much I could cut the countertop and bought a new sink that would fit. Wife's happy, I'm happy.

To narrow things down:

One sink or two?
Top mount or under mount?
Cut-out size (the sink needs to be removed for this)
Is there room for the cut-out to be enlarged if needed?

3 holes in it for faucet mount?
Dimensions are over all 28x17-1/2
plastic or s/s ok

Kitchen sink?
Material? Stainless or ?
How many holes in it for faucet mount?
Dimensions are they over all or hole size?