Forum Discussion
Guy_Roan
Jul 07, 2020Explorer
When I used to have a problem getting the coupling off the ball, I solved it by prior to doing it take the pin that secures the coupling to the receiver out. then raise the tongue jack. This relieves the pressure that is holding the two together.
Just make sure your trailer wheels are chocked or you still have your safety chains attached. especially if your trailer is on a grade
Guy
Just make sure your trailer wheels are chocked or you still have your safety chains attached. especially if your trailer is on a grade
Guy
About RV Newbies
4,026 PostsLatest Activity: Jun 15, 2017